Finished Color Therapy Light Box Referbish Project

 Its finally done, it took awhile to find a suitable fan to install.

Assembled and ready to use
 

For practical applications

Color Therapy Light Box Referbish Project

It has been very nice weather to work outside painting and refurbishing the color therapy light box project.

Its getting closer of being finished soon.

 Just waiting for a part or two to arrive, meanwhile I have been heat curing or baking a few panels to get ready to assemble.

A nice day for painting.

 An experimental aluminum plate panel primer painting for an old color therapy light box.

 Most all the panels primed painted and ready to be painted with the heat resistant paint.

It was a very nice day of having things coming together as it needs to be.
 

Both completed Crystal Guardian Towers 1.0 and 2.0

The prototype 1.0 left side and completed 2.0 right side.

 I had to retouch up the 1.0 prototype finding out that I had a copper tube soldered in the wrong place, its nice to review finished projects and see what you can apply to newer updated projects.

Almost finished Crystal Guardian Tower 2.0

Thursday was a beautiful day to finish the silver soldered copper Crystal Guardian Tower 2.0.

All is left is to buff, shine up the copper, and start wire wrapping and coiling the crystals and parts of the tower with Tesla wire (magnet wire) for an extra boost.

Testing out the Crystal Guardian Tower 2.0 Part 2.

Test fitting and placing two crystals.

More soldering of the copper fittings and getting the solder to hold into place.

Part of the tower came apart in a few places shortly afterwards. 

Not to shabby for an experimental test soldering run. 
More to come soon..

Crystal Guardian Tower 2.0 Part 1

A somewhat nice day to work more on the Crystal Guardian Tower 2.0

May have to find a better heat resistant template down the road.

The challenge was to solder tesla wire and the upper copper circle to the copper fittings.  

Test fitting the Crystal Guardian Tower 2.0

Thursday experimental template after drilling holes in a woden square.

 The woden template might hold up the Crystal Guardian Tower 2.0 avidly stable.

The last test is to silver solder it together, todays weather though delayed the project.

Tuesday Reworking C.G.T. Part #2

The Crystal Guardian Tower 1.0 reworked and resoldered.

The Shungite fits nicely in a different copper fitting without to much movement or being loose.

Tuesday Reworking C.G.T. Part #1

A very nice sunny day to do more touch up and resolder of the Crystal Guardian Tower 1.0

The soldering rig.

The Sunday Project

Sunday was a very nice afternoon to rework the Crystal Guardian Tower and trying out a experimental soldering rig from a camera tripod.

In the end result of testing and a trial run, not bad for a retrofitted camera tripod with a long adjustable metal band for the propane tank.

Tuesday is going to be a touch up and replacing a copper fitting with a different one.

More pictures to come soon..
Happy 420 Day to those that can smoke it legally or CBD... 

The Crystal Guardian Tower 1.0

An upgraded version from the prototype. 

After my last post a few weeks later and spending time at a few hardware stores and buying copper reducers, taking along a few crystal wands to size fit the copper of finding what was needed to make the crystal guardian tower.

Taking the time to solder the crystal tower together on a very nice sunny warm day.

Researching into the unknown beginning of a prototype part Four

The completion and final result for a quantum crystal generator transmitter tower. 

Phase Four:
 Ready for take off...

The last crystal that was added a double terminated tesla wire wrapped rose quartz wand.

It looks more like an odd spaceship or a tesla tower that I use to draw from looking at clouds long ago while growing up. 

To be continued at a later time when I can take it outside for a real test run with warmer weather, but for the moment it sits by the patio door pointed outwards to the sky... 

Spring is here in Wisconsin and I heard a few robins chirping away and seen a few Saturday 
mid-morning; welcome Brigit the bringer of light and of new beginnings.  

I do plan to make another one sometime though, perhaps a second generation of adding different crystals and more tweaking of the wire carriage or base to hold crystals better in place. 

Until the next time 1.0 The upgraded crystal tower..

Researching into the unknown beginning of a prototype part Three

The last step to finishing this project of phase three.

Thus so far what I found out to this interesting delightful project is that is a crystal quantum generator of somesort.

The crystal list if you decide to make it
1 Laser quartz medium(Center piece)
1 Selenite wand (Right side)
1 Shungite wand (Left side)
1 Clear Calcite or Iceland Spar (on the bottom)
1 Yellow calcite (layered or stacked above the clear calcite)

2 Triskelion symbols made from tesla wire.

The pendulum energy test resulted very high energy, so I put it by the porch window door for a test run until the third crystal finds me to add to it. 

Researching into the unknown beginning of a prototype part Two

Phase Two

After many hours of wire wrapping and soldering a Triskelion on the bottom it is slowly coming together.  

Phase three is on its way soon by adding three more tesla wire wrapped crystals and little touch up here and there and a final test run with a pendulum.

Its starting to look like something like from 
Dr. Evermore creations with a pinch of Nikola Tesla.

Researching into the unknown the beginning of a prototype part One

An experimental somewhat open architecture crystal energy generator.

  

Its starts with an idea that kept me up most of the night from Thursday.

"An idea is like a planted virus, it grows, it spreads throughout the mind, and the body shall not rest till the idea is brought forth from the void of the universe and brought into the physical realm." 

^^A somewhat twisted quote from the movie Inception.^^ 

The carriage or base is made from copper wire and then shaped and soldered together to hold the one crystal in the center.

I have that feeling that there is going to be more added to this interesting project ahead just a small part for phase one.

Working with copper wire and soldering it together with silver solder is an artform of a mixture of Alchemy and mindfulness.